Editorial Note: This article is written with editorial review and topic relevance in mind.
This ip address is used to access the camera's web interface where you can configure various settings. Presented below are links to two short guides on how to configure a static ip. Now open up internet explorer if you are using windows (other browsers are not supported) or safari if you are on a mac, and input the ip address of your recorder into the address bar (e.g.
15YearOld Is Charged With Murder in Fatal Shooting of Chicago Postal
192.168.1.64 is private use ip. The address 192.168.1.64 is a private ip, typically assigned to devices on your local network such as phones, computers, smart tvs, and speakers. By accessing 192.168.1.64 in your browser, you can enter your router's admin panel to configure network settings, change passwords, and manage connected devices.
The default ip address of the camera is 192.168.1.64.
These addresses are reserved for use within private. The default ip address for most hikvision cameras is 192.168.1.64. 192.168.1.64 is part of the private ip address range, which falls between 192.168.0.0 and 192.168.255.255. Since the camera's ip address (192.168.1.64), the computer's ip address must be in the first subnet as well.
Power on the camera, and connect the camera to the network. Open a web browser and input the default ip address. By default, your camera’s ip address is 192.168.1.64. Change the ip address of your pc to the same subnet as the camera.
Input the ip address into the address bar of the web browser, and click enter to enter the activation interface.
